What to do if SIM is showing no service?

How to Fix “No Service and Signal” on Samsung and Android

1. Restart Your Android or Samsung Device. …
2. Toggle Airplane Mode. …
3. Manually Select Network Operators. …
4. Run a Ping Test With Service Mode. …
5. Double-Check Your Sim Card. …
6. Restore Factory Settings. …
7. 5 Apps to Spice Up Your Selfie.

for instance, Why my SIM network is not working?

Method 1: Remove Battery and SIM Card

The network error can be fixed by re-inserting the SIM card properly. Here are the steps you need to do. Step 1: Power off your Android smartphone and remove both battery and SIM card. Step 2: Wait for about 5 minutes and then insert SIM and battery.

significantly, Why is my Samsung not reading my SIM card?

Open Settings > Mobile Network. Under SIM Card info and Settings, Tap the SIM, and toggle on “Enable”. Also, make sure the data roaming is ON to avoid this issue when you’re in a roaming area. When you face the issue of “SIM Card not detected”, clearing out cache data could prove an effective solution.

also What does ## 72786 do?

Network Reset for Google Nexus Phones

To network reset most Sprint phones you can dial ##72786# – These are the dial pad numbers for ##SCRTN# or SCRTN Reset.

Why my SIM is showing emergency calls only? If your SIM Card is not inserted or is not seated properly, it may cause your phone to only allow calls to 911. Ensure your SIM Card is securely inserted into the slot. It may not hurt to remove it and re-seat it. … You may also want to try a different SIM card in the case that it is defective.

Can not connect to mobile network?

To do this, go to settings and tap on “Wireless Networks” or “Connections.” From there, switch on Airplane mode and turn off your phone. Wait for half a minute and then turn your mobile phone back on. Go to the same settings section and turn off Airplane mode. After that, check if your mobile data is working again.

How do I know if my SIM card is not working?

To test whether your SIM card is misaligned, turn off your device and remove the SIM card. Reinsert the SIM card and turn your smartphone back on. If the SIM card was misaligned, your device should now be able to read the SIM card and connect to a mobile network. … Insert the card into the alternate smartphone.

How do I setup my SIM card?

It’s easy!

1. Make sure your phone is off.
2. Locate the small hole on the side of the phone. …
3. Insert the tool provided or a paperclip into the hole, which releases the SIM tray.
4. Take out the old SIM card and place the new one in the same way.
5. Carefully push the tray back in.
6. Turn on the phone.

How do I know if my SIM card is activated?

The best way to see if the SIM is active would be to insert it into a device which has a compatible SIM card slot. The good news is inserting any older SIM card into a phone will not harm the phone in any way or change any of the settings.

Why is my phone says mobile network unavailable?

Method: Open your phone menu “Settings”. Beneath the “Wireless and Networks” tap on “More” and then hit on the “Mobile Networks” link. … When you have done this, restart your device and this will fix the issue of your mobile network not available.

How do I reset my SIM card network?

Try using your mobile network again to check if it works.

…


Here’s how to do that.

1. Open your phone Settings.
2. Scroll down and select System, then tap on Reset options.
3. Carefully select Reset mobile network (or Reset WiFi, Mobile Network, Bluetooth), and then select the affected SIM card.
4. Finally, tap on Reset Settings.

How do I activate my SIM card?

Follow these steps to make the connection:

1. Eject the SIM card from the device and record the SIM ID. …
2. Insert the SIM after your account has been updated.
3. Restart your phone again and allow the activation process to complete fully.

How do I turn emergency mode off?

Turn Emergency Mode Off

1. Press and hold the Power button until the ‘Power off’ prompt appears then release.
2. Tap Emergency mode. Alternatively, while on the Home screen tap the Menu icon. (upper-right) > Turn off Emergency mode. Allow several seconds for the change to take effect. Top.

How do I activate my SIM card?

Contact your network service provider and make sure the SIM ID on the card matches the SIM ID in your account with the service provider. Insert the SIM after your account has been updated. Restart your phone again and allow the activation process to complete fully.

How do I connect my mobile to my network?

To connect an Android phone to a wireless network:

1. Press the Home button, and then press the Apps button. …
2. Under “Wireless and Networks”, make sure “Wi-Fi” is turned on, then press Wi-Fi.
3. You may have to wait a moment as your Android device detects wireless networks in range, and displays them in a list.

Can’t connect to this network cellular data isn’t working properly?

If your cellular data connection isn’t working and you can’t connect to the Internet, type a new Internet APN based on your location and mobile operator. … Select the Start button, then select Settings > Network & Internet > Cellular > Advanced options > Add an APN.

How do I reactivate my SIM card?

Inform the customer service representative that you already have a SIM card and you would like to reactivate it. Remove the SIM card from the phone, as you will need to have it readily available so that you can give the representative the series of numbers and codes located on the back of the card.

How can I test my SIM card?

How to Test a SIM Card

1. Slide off the back cover of your phone and remove the battery and SIM card inside. …
2. Wipe any dirt or dust particles from the SIM card using a clean cloth. …
3. Remove dust and dirt from the slot dedicated for the SIM card. …
4. Fit the SIM card into the slot. …
5. Return the battery back to your phone.

Can you program a SIM card?

You can swap out a GSM phone’s SIM card at any time, but you will first need to program the card with your account information. To program a SIM card, you will need to contact your mobile phone provider and have them initiate an over the air (OTA) update that will be wirelessly transmitted to your phone.

How do I activate my SIM card on Android?

Locate the SIM card slot on the side of your tablet, find the hole and insert / push your sim slowly until you hear a CLICK sound (which indicates that the sim card is already secured). To activate a SIM card: 1. Once the sim is in placed, turn-on the unit and Turn off Wi-Fi after completing the set-up instructions.

How can I know my SIM is active or not online?

Visit www.textmagic.com or download the TextMagic mobile app on google play store. Enter your phone number and country and click on Validate Number. This app will show you the status of the number if it is active or not. Another app you can use is Phone Number Monitoring.

How do I know if my Smart SIM is active?

Postpaid and prepaid subscribers can text SIMCHECK to 5832. Smart will then send a message whether the SIM is LTE-capable or not. The service is free. Those who do not have an LTE-capable SIM may go to a Smart store to have their old SIM replaced for free as well.

How do I activate mobile network on Android?

Go to the Settings menu, then scroll down and tap on Mobile Networks. Tap on that option and then tap on the Network Mode. You should see LTE network selections and you can just pick the best one for your carrier.

How can I solve mobile network problem?

Try these tips if you have no network at all or a weak signal.

1. Restart your device. …
2. Grip the phone lightly. …
3. Ensure Airplane mode is OFF. …
4. Switch to 2G (Helps with phone calls only) …
5. Make sure your device is fully charged. …
6. Make sure your device isn’t in Power Savings Mode. …
7. Map your home’s signal. …
8. Clear any obstructions you can.

• Reference 1
• Reference 2
• Reference 3
• Reference 4