Desk Design Guidelines
A conventional office desk is often about 60 inches wide and 30 inches deep. The knee space under the desk should be 20 to 26 inches high, no less than 20 to 24 inches wide, and 12 to 15 inches deep. Drawers installed below the work surface are generally larger than those above it.
in addition, How wide is a normal desk?
Desks. The minimum width of a freestanding desk ranges between 48 to 72 inches, the depth ranges between 24 to 36 inches and the height is around 30 inches.
Also, How do you read a desk size?
The industry standard is to display these measurements in the order of width first, height second and depth third. For example, our Price Point Beech Panel End Deskcan be shown as 1600 x 730 x 600. What this means is, the office desk is 1600mm in width (W), 730mm in height (H) and 600mm in depth (D).
in the same way Is 24 inch desk deep enough? We’ve already seen that the minimum desk depth at foot level is 24 inches so this is your basic minimum desk depth which is plenty. … A thin but deep desk will allow you to push the laptop or keyboard back and work on some reading or writing for a while.
What is the ideal desk height?
Most work surfaces are a standard 28″ to 30″, which is a good sitting height for most people between 5’8″ and 5’10” tall who use conventional task chair. If you are taller or shorter, be prepared to change your work surface height.
Table of Contents
What is the standard desk?
The standard desk is 29 to 30 inches tall. Desk sizes vary, but common dimensions are 48, 60, and 72 inches wide and 24, 30, and 36 inches deep. What are the minimum dimensions required when two people share a desk in an office?
How much desk space do I need for 2 monitors?
You can use a desk around 50″ for placing two monitors. A desk slightly bigger than 50″ is more helpful as you can accommodate your other gaming gear on the desk conveniently. For three monitors you need an even bigger design. you can look for a desk with 55-60″ wide.
Is 600mm deep enough for a desk?
The depth of your desk should be between 508mm and 762mm, with a width of at least 610 mm. … If you’re using your desk for typing and computer work, the recommended depth is between 712mm and 762mm to ensure you have enough space for your equipment and that you can set your desk up correctly.
Are Ikea dimensions in inches?
Yes. Depending on where you live, the dimensions are indeed either in inches (US) or in metric units (the rest of Earth).
Which is width and height?
What comes first? The Graphics’ industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width. … They all use the width by height in order to determine orientation.
Is a 25 inch desk deep enough?
The standard size for basic computer desks is 50-inches x 25-inches. The depth only needs to fit a monitor stand and keyboard. … This size also suits people concerned with saving space. Some computer desks have a pull-out tray under the tabletop to hold a keyboard and mouse to afford a smaller depth.
What depth should a desk be?
We have found that 48 inches in depth is an ideal measurement around the desk and away from any obstacles. This allows enough room for the chair to be pushed out and moved back into place comfortably.
What depth should a computer desk be?
If you’re using your desk for typing and computer work, the recommended depth is between 712mm and 762mm to ensure you have enough space for your equipment and that you can set your desk up correctly.
Is 36 inches too high for a desk?
Typical desk heights fall between 28 and 30 inches, which are designed to be ideal for people between 5’8″ and 5’10”. However, plenty of desks are also available from 22 all the way to 33 inches tall, and as adjustable models, leaving room for you to find your perfect fit.
Is 32 inches too high for a desk?
Standard Desk Dimensions
For people between 5 feet, 8 inches tall and 5 feet, 10 inches tall, the proper height is anything between 28 inches and 30 inches. … The very best of these can go as low as 22 inches and as high as 33 inches, giving enough comfort for most employees.
Should chair arms fit under desk?
There should be space to get your legs and any arm rests attached to the chair under the desk. … In terms of the ideal height of the desk, if you are seated with your chair correctly adjusted then your arms should be bent to 90 degrees and the desk should be set to the height of your forearms.
How big should a desk be in an office?
A standard large desk size that will suit most uses is 60-inch x 30-inch, with a height 30-inches. These dimensions will comfortably accommodate most general use cases and should be used as a baseline.
What is the typical height of an office desk?
In offices all around the world, standard desk heights are around 28 and 30 inches tall. This size desk works well for people who are between 5’8” and 5’10”. However, not everyone sitting at a desk is between these heights!
What is the best size for dual monitors?
❓ What is the best monitor size for Dual Monitors? Medium monitor size between 24″ to 32″ is best for office and personal use. If you want to use a dual monitor stand (recommended), most will only support screen size upto 32″.
What is the correct height for a computer desk?
The correct height for a computer desk is influenced by a few factors, including your height, the equipment you use, and your daily tasks. However, 28 inches (71.12cm) is the standard desk height that you should be using, especially if you’re between 5’8″(172.72 cm) and 5’10″(177.8cm) tall.
How much clearance do you need for a desk chair?
Desk chair space
As you plan your office layout, remember that a standard desk chair usually requires an area footprint of about 42” (107cm) square. Most of this dimension (approximately 20-30” or 50-76cm) is behind the desk chair.
What do IKEA dimensions mean?
If only two measurements are provided, then it’s usually length x width (or width x depth)… basically the longest side x the shorter side. For the desk you linked to, the width is 55 7/8″, the depth is 19 5/8″, and the height is 29 1/2″. The full dimensions are listed near the bottom-right of the product page.
What is length and width?
Length refers to the distance between two ends of an object. Width refers to the measuring the breadth or how wide the object is. Length can be measured in geometry by considering the biggest side of the object. Width can be measured in geometry by considering the smallest side of the object.
What is width depth and height?
The distance from the front of the product till the back measured across the side panel is your WIDTH. In our example we measured 15/16. Step 3. The DEPTH or height of the product is the distance between the bottom and the top of your product as it’s sitting on the shelf, closed.
Discussion about this post