The trucks should always fit the width of your Skateboard. It’s important that they’re not much wider than the deck because otherwise, the centre of gravity will shift to the side of the deck. This may have an effect on flip tricks and can affect the general boardfeel.
although, What is the best truck size for a 8.0 deck?
Skateboard Truck and Deck Width Size Chart
| Truck Axle Width (in) | Suggested Deck Width (in) |
|---|---|
| 7.4 | 7.25 – 7.625 |
| 7.6 | 7.4 – 7.875 |
|
7.75 / 7.8 |
7.6 – 8.0 |
|
8.0 |
7.75 – 8.25 |
Besides, What size trucks do pros ride?
This can influence what size skateboard pros will ride but it seems that most pros will ride a 8.5″ skateboard. There are many pros that choose to ride smaller boards but this seems to be the standard size for most professional as well as beginner skaters.
however Are wider trucks better? The answer is simple. Your axles should be about as wide as your board. A bit less or a bit more length on the truck is ok. If your truck is a bit wider then your ride will be more stable, but your edge pressure will be reduced meaning you need to make a greater of an effort to turn.
so that Does it matter if trucks are too small?
What Happens When Your Trucks Are Too Narrow. When you’re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.
What is a good deck size? A good size deck starts at 12 feet by 12 feet but can be as small as 8 feet by 8 feet for limited specialty use, such as a sitting area or a barbeque area just outside of the kitchen. Also deck should be no larger than the largest room in the house and not exceed 20% of the house square footage.
Table of Contents
Are CCS Trucks good?
The Good and the Bad
The CCS complete is perfect for the not too demanding beginner of all ages. It’s able to handle tricks like ollies, kickflips, board slides, and grinds at a basic level. If you plan on grinding every day and do some hardcore skating, the trucks might not be your best pick.
Are thunder trucks better than independents?
Thunder has the lowest high trucks and Venture has the highest ‘high’ trucks. Independent is sort of in the middle. It’s a bit confusing but keep this in mind when you get new trucks. Low or high doesn’t really matter to everyone, some prefer highs and some prefer lows.
What size deck does Tony Hawk Ride?
Among the legends of the discipline, Tony Hawk rides surprisingly thin decks nowadays at only 8.5”, but he used to have 9.0” pro decks released in the past.
What size deck do most pros ride?
Most people ride 8-8.5 now though so that’s what they produce.
Do riser pads give more pop?
They also have the added bonus of giving your board extra pop, since they add more distance between the tail and the ground. Another reason for skateboard riser pads is that they absorb some of the shock of impact, which can help keep your hardware from vibrating loose.
Is an 8 inch deck too small?
7.00″ to 7.50″: Narrow decks ideal for youth riders. 7.50″ to 8.00″: Medium deck width for teen or adult riders skating street terrain or doing more technical tricks. 8.00″ to 8.50″: Ideal for various street and transition terrain. Parks, pools, rails, stairs.
What size trucks do I need for a 9 deck?
Skateboard Truck & Wheel Size Chart
| Truck Size | ||
|---|---|---|
| 8.25″ | 5.5 | 8.0 |
| 8.5″ | 5.85 | 8.0/9.0 |
|
8.75″ | 9.0 | |
| 9″ | 9.0 |
What truck size do I need?
Skate Truck Size to Skate Deck Size Guide by Brand
| Size | Actual Axle Length | Recommended Deck Size |
|---|---|---|
| 6.0 | 8.625″ | 8.5″ and over |
| 129 | 7.75″ | 7.4″ – 7.75″ |
| 139 | 8″ | 7.75″ – 8.25″ |
| 149 | 8.5″ | 8.25″ – 8.75″ |
•
May 2, 2017
How much does a 12×12 deck cost?
Cost To Build A Deck By Size
| Deck Size | Square Feet | Average Cost |
|---|---|---|
| 10×10 | 100 | $1,500 – $3,500 |
| 10×12 | 120 | $1,800 – $4,200 |
| 12×12 |
144 |
$2,160 – $5,040 |
| 12×20 | 240 | $3,600 – $8,400 |
What is the most common deck size?
What is the Average Size of a Deck? For most builds, decks are wider than they are deep, with the longer portion of the deck running alongside the house. According to landscapingnetwork.com, the average size is between 300 and 400 square feet. Decks can also be multi-level, adding more space and dimension to your home.
How high should a deck be off the ground?
There is no standard height for a “grade-level” deck—the maximum measurement from grade to the deck surface could be 6 inches, 12 inches, 24 inches, or more. But generally speaking, I apply the term to decks that are up to 30 inches above grade, since guardrails are required for any decks that are higher than that.
What does CCS stand for skateboarding?
Originally known as California Cheap Skates, we jumped into the mail-order business when it was just getting started.
Are CCS trucks heavy?
These trucks are great, good weight and height, thick though so they’re gonna last with grinding and they’re inexpensive! The bushings are hard but that’s the way I ride. They’re tough too after landing so many ollies they’re not bending like those other “super light” trucks that are hollowed out.
Are CCS cruiser wheels good?
They are incredibly durable and come in the perfect “tweener” durometer. They are hard enough to pop ollies over curbs, but soft enough that twigs, rocks, and cracks won’t be a worry. These wheels are gonna be a good time – guaranteed.
What trucks are best for street skating?
The Best Skateboard Trucks for Street
- CCS Skateboard Trucks.
- Paris Skateboard Trucks.
- Independent Standard Trucks.
- BYBAIZ Skateboard Trucks.
- Havoc 5.0 Skateboard Trucks.
- Thunder Polished Trucks.
- Venture Skateboard Trucks.
- Tensor Skateboard Trucks.
Are independent trucks the best?
Independent Skateboard Trucks
Indys are considered the best turning, best grinding and strongest trucks that you can get. The new Stage 10 truck is the lightest Indy ever made. With a new super strong kingpin and unbendable axles this truck is untouchable.
Are Low trucks better for street skating?
Low trucks are generally for tech skating as the wheels sit closer to the board, creating a tighter center of gravity, making flip tricks a bit easier. You’ll want to ride smaller wheels, 48mm to 53mm, to avoid wheel bite. Low Trucks are better suited to ledge grinds and general ‘tech’ skatepark skating.
What brand does Tony Hawk Ride?
U.S. Birdhouse Skateboards (originally Birdhouse Projects) is a skateboard company formed by ex-Powell Peralta professional skateboarders Tony Hawk and Per Welinder in 1992. Birdhouse makes decks and wheels, as well as clothing and accessories.
Does Tony Hawk wear Vans?
On his feet, he wears Vans Classic Slip-Ons. The shoes were developed in 1977, and Hawk “incessantly bugged” Dad, Frank Hawk, for them, finally wearing him down in 1978.
What deck size is the best?
What size skateboard should you get? We recommend starting with a skateboard deck width that is proportional to your shoe size. If you wear men’s size 6.5 to 9, start out with a deck width of 7.5 to 8.0 inches. If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches.
Discussion about this post