Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.
in addition, What to do if DVD is not reading?
If the disc still cannot be read, it is probably dirty, scratched, or burned in a wrong format. Then, you need to clean it, repair it, or re-burn it to see whether the DVD not playing error is fixed.
Also, How do you reset a DVD player?
On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.
in the same way Why does my DVD player not work? Check if the optical disc drive is dirty or broken. Dust is always the culprit for most DVD player not read/load errors. … DVD player not working might be a sign that the disc tray, tray motor or laser is worn out. To fix any of the DVD hardware, you need to open the housing and check the inside with special tools.
How do you troubleshoot a DVD player?
How to Troubleshoot a DVD Player
- Check audio connections to make sure they’re secure.
- Replace the cable connecting the DVD unit to your receiver.
- Clean the contacts on the player and receiver with electronics-grade contact cleaner.
- Make sure DVD is clean and unscratched.
Table of Contents
How do you know if your DVD player is bad?
Listen to the machine when you insert the DVD. If you hear noises in the form of a series of clicks and creak-like sounds as the lens and laser both engages and attempt to read the disc, your lens is likely still good, only dirty or otherwise having difficulty reading the disc.
How do I reset my LG DVD player?
Press the HOME button on the remote control and select Settings > OTHERS > Initialize, then press ENTER or WHEEL. 2. Choose the option you require and select Close when finished. Factory Set – You can reset the player to its original factory settings.
How do I get my DVD player to work?
How to Connect a DVD Player to a TV
- Unplug your TV and DVD player.
- Set the DVD player on a shelf near the TV. …
- Connect your DVD player with the included cables. …
- Whichever cable you use, plug one end into the DVD player, and the other into the corresponding port in the TV.
Why won’t my DVD player play certain dvds?
A video burned to a DVD must be burned in a specific way. A WMV or AVI movie file burned to a disc will usually not play in most players unless it is converted to another format first. Special programs exist that convert video files to the right format before they are burned so most players can play them.
How do you unfreeze a DVD?
How to Fix DVD Freezes
- Inspect the DVD on both sides. …
- Get your cloth. …
- Run water over the dirty surface of the DVD. …
- Wipe the crud off the DVD carefully, from the center out. …
- Don’t put too much pressure on the cloth.
What causes a DVD not to play?
Some DVD scratches are more serious than others. Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.
Why does my DVD player not play some dvds?
A video burned to a DVD must be burned in a specific way. A WMV or AVI movie file burned to a disc will usually not play in most players unless it is converted to another format first. Special programs exist that convert video files to the right format before they are burned so most players can play them.
Why won’t my DVD player play my DVD?
Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.
How long will a DVD player last?
A typical DVD disc has an estimated life expectancy of anywhere from 30 to 100 years when properly stored and handled. How the disc is stored and handled will determine the longevity of the media.
Why won’t my DVD player play certain DVDs?
A video burned to a DVD must be burned in a specific way. A WMV or AVI movie file burned to a disc will usually not play in most players unless it is converted to another format first. Special programs exist that convert video files to the right format before they are burned so most players can play them.
How do I make my LG DVD player region free?
- Turn on the player (without disc inserted)
- Open the disc tray.
- (Press PAUSE)
- Press 0, 0, 0, (0)
- Enter region (1-6; 0=region free)
- (Press PAUSE)
- Turn it off.
How do you reset a portable DVD player?
You can reset your DVD player either via a remote control combination button press or via the screen menu (SETUP) return set (reset). Your instruction manual will normally give accurate instructions for resetting the player. Look over the chapeter titled “reset” or “Initialize mode” .
Why does my TV say no signal when I plug in my DVD player?
If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port. Sometimes cable can short-out. … Test if your DVD player works on other TVs. It could be your DVD player breakdown that leads to No Signal on your HDTV.
What input should TV be on for DVD?
HDMI: The most modern connection, HDMI resembles a longer, thinner USB cord. HDMI connections are the highest quality connections and you only need one cord for both the audio and video. A/V Cables (Three-Prong): Standing for Audio/Visual cables, this the most common connection for DVDs.
How do I connect my DVD player to my HDMI TV?
Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.
Can you play DVDs on a CD player?
No you cannot play a DVD in a CD player. You will not destroy the DVD though it’s not impossible the DVD will get stuck (not physically) and you’ll have fun getting it out.
What is the difference between a DVD player and a Blu Ray DVD player?
The biggest difference is in the capacity of the discs. Blu-ray boasts up to 25 GB on single-layer discs and 50 GB on double-layer discs, with HD DVD at 15 GB and 30 GB. … Both HD DVD and Blu-ray players are backward compatible with older DVDs, and both can upconvert regular DVDs for viewing on an HDTV.
Do DVD players wear out?
In short, no. Optical media like CDs and DVDs does not wear out from repeated use. It can degrade or become damaged, however. CDs and DVDs can degrade over time because their recording layers are made with a dye that is extremely photosensitive; it deteriorates when exposed to UV rays over time.
Can a DVD player be fixed?
Like CD players, DVD players are relatively trouble free. You can clean the machine, replace cords, and replace faulty motors, belts, and trays. … A good investment is a CD/DVD repair kit for polishing out surface scratches, available at larger stores where CDs and DVDs are sold.
Can you fix a DVD that skips?
How do you fix a DVD that skips? One simple solution you can try is to use rubbing alcohol. Use a lint-free cloth, like the kind used to clean eye glasses. Hold the cloth over the opening of your bottle of rubbing alcohol and tilt the bottle to add a small dab of rubbing alcohol to the cloth.
Why does DVD player freeze up?
Player Problems
Dust or other debris inside the player can partially block the laser beam, preventing a clean read from the disc and causing skips and freezes as the hardware attempts to decipher the data. Using a lens cleaning disc can remove these impediments, restoring normal playback functions.
Discussion about this post