To reset iPod nano or iPod classic settings, choose Settings→Reset Settings from the iPod nano Home screen or iPod classic main menu, and then select Reset (or Cancel to cancel). This resets all the items on the Settings menu to their default settings.
although, Why can’t I restore my iPod classic?
If the device still won’t restore normally try this method. Connect the device to the USB cable, press MENU+SELECT like a standard reset but keep holding for 12 seconds. The device should reboot as normal and then the screen should go blank. Now open iTunes and try to restore again.
Besides, Why is my iPod classic corrupted?
Data corruption usually occurs when you unplug the iPod without ejecting it first or if you drop the iPod while the hard drive is spinning (hard drive disk errors). Corruption errors can cause the iPod to freeze and may prevent CopyTrans and CopyTrans Manager from properly copying music back and forth.
however How long does it take to restore iPod classic? iTunes will try to reinstall iOS without erasing your data. However, if the process takes longer than 15 minutes, repeat the previous steps, but this time choose the Restore option. You will have your device in iPod restore mode. Set up your device.
so that How do I unlock my iPod classic?
Start with unit in the unlock position. Switch to lock then back to unlock. Immediately hold the Menu and Play/Pause button simultaneously for 8 seconds. The iPod should rest and display the Apple logo and start back up.
Can I still use iPod classic? Today Apple’s iPod touch (7th generation) has the largest internal drive of any iPod model. You can continue to use your iPod classic with iTunes Store purchases or ripped music from CDs.
Table of Contents
Can an iPod Classic be repaired?
We can repair your iPod Classic at any of our locations. We routinely carry out a wide array of repairs, from cracked screens to battery replacements. … Diagnosis of the issue is always free, and we can make many common repairs while you wait, so you can get back to using your iPod as soon as possible!
Can an iPod classic hard drive be repaired?
Devices are a lot of fun, but sometimes they break. After you’ve invested all that money in a new gadget, you don’t want it to go to waste. If you have an iPod, you can use an ipod classic hard drive repair service. It’ll quickly get your hard drive working again.
How do I test my iPod classic hard drive?
Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for Manual Test, then select IO > HardDrive > HDSMARTData to reveal your stats.
How do I use my iPod classic?
To use iPod classic, you put music, videos, photos, and other files on your computer and then add them to iPod classic. The controls on iPod classic are easy to find and use. Press any button to turn on iPod classic. The first time you turn on iPod classic, the language menu appears.
How do I get my iPod classic out of disk mode?
To turn iPod Disk mode off:
- Toggle the hold switch on and off.
- Press and Hold the Select and the Menu button for more than ten seconds. If you have different buttons, try the Play/Pause and Menu buttons instead until the Apple logo appears.
- The normal selection screen should appear, your iPod is out of Disk mode.
How do you unlock an old iPod classic?
Toggle the “Hold” switch. Move the switch from “Off” to “Hold” and back to “Off” again. Press and hold the “Menu” and “Select” buttons until the Apple logo appears. This may take up to 10 seconds, so be patient.
How do I wipe my iPod classic without iTunes?
Tap “Erase All Content and Settings.” The iPod prompts you with two buttons: “Erase iPod” and “Cancel.” Tap “Erase iPod.” The iPod erases its content and reboots its iOS software.
How can I restore my iPod without iTunes?
Hold the Play/Pause and Menu buttons together for about eight seconds. Repeat this process until the iPod resets. When your iPod is disabled for some reason, this reset will usually restore performance to normal.
How do you switch off an iPod classic?
To turn off an iPod classic, press and hold the Play/Pause button. To turn off an iPod shuffle, slide the switch to the off position, hiding the green layer underneath the switch.
How do you reset an iPod classic 5th generation?
Hard Reset APPLE iPod Classic 5th Generation
- Connect your iPod to the PC and then open iTunes.
- Select your iPod from the left menu in iTunes.
- You have to click the Restore button in iTunes.
- Now you have the opportunity to back up all your files.
- Then click Restore to confirm information about this procedure.
What can I do with an old iPod Classic?
What to Do With Your Old iPod: 6 Great Ideas
- Install New Firmware.
- Replace the Battery.
- Use Your iPod as a Portable Hard Drive. Even if you’ve already got a newer iPod or iPhone, you can still put your old one to good use. …
- Replace the Hard Drive.
- In-Car Music. …
- Sell It!
Why was iPod Classic discontinued?
According to Tim Cook speaking at WSJD Live, the iPod Classic was discontinued because the parts were unavailable and a redesign was unwarranted given the small amount of consumer interest in the product.
Does iTunes still support iPod Classic?
The iPod Classic is no longer supported by the software, period. Backwards compatibility is not considered and old versions of iTunes are not provided by Apple. In fact, the support personnel are forbidden to provide an older version. They suggest buying a new iPod.
What can I do with an old iPod classic?
What to Do With Your Old iPod: 6 Great Ideas
- Install New Firmware.
- Replace the Battery.
- Use Your iPod as a Portable Hard Drive. Even if you’ve already got a newer iPod or iPhone, you can still put your old one to good use. …
- Replace the Hard Drive.
- In-Car Music. …
- Sell It!
Can I replace iPod classic battery?
If it is out of warranty, Apple once would replace the battery in your “full size” iPod — the original iPod, iPod 2nd Gen, 3rd Gen, 4th Gen, 5th Gen/video, or classic — for a cost of US$59 plus US$6.95 shipping, but it no longer offers this service. … These iPod models do not require soldering to replace the battery.
How much does it cost to replace iPod classic hard drive?
4 Answers. Richard Sloane, the cost is anywhere between $110 to $160, I definitely suggest to fix it. There is no way you could replace your iPod with something of similar sound quality for a cheaper price.
Can you replace an iPod classic hard drive?
The iPod Classic became an enduring icon largely because it contained a compact, 1.8in 160GB HDD – that was something like two-and-a-half times more capacious than its closest competitor, and ten times the storage of an iPhone from the same era. … “You can now upgrade that old iPod with anything up to a 1TB mSATA SSD.”
How long do iPod classic hard drives last?
Even if you store it perfectly, you can expect to lose 25% capacity within 3-4 years. For long term storage, it’s best to charge it to just above 50% and let it self discharge down to maybe 40 or 35% and then charge it back up to over 50.
How do I know if my iPod classic hard drive is bad?
Bad hard drive or cable
One of the best methods to diagnose a failing hard drive is to listen to the drive. If you put your iPod up to your ear, you should hear a smooth-sounding whirr of the hard drive spinning. Any loud clicking or grinding sounds may mean that your iPod’s drive is failing.
Discussion about this post