In the System Properties window, click the Hardware tab. On the Hardware tab, in the Device Manager box, click the Device Manager button. In the Device Manager window, click the DVD/CD-ROM icon. Under the DVD/CD-ROM icon, click to select the drive to be reinstalled.
in addition, How do I fix the CD DVD icon not showing up on my computer?
Optical Drives (CD/DVD) Icon Not Showing in My Computer Window
- Type regedit in RUN dialog box and press Enter. It’ll open Registry Editor.
- Now go to following key: …
- Look for “UpperFilters” and “LowerFilters” strings in right-side pane. …
- Restart the system and now you should have access to your optical drives.
Also, How do I install a program from a DVD drive?
Installing software using a USB thumb drive
- Insert the software installation disc into the CD/DVD drive.
- If an AutoPlay window appears, click Open folder to view files. …
- Select all files and folders, then right-click and select Copy. …
- Insert a USB thumb drive into a USB port on the computer that has a CD/DVD drive.
in the same way How do I fix no CD drive detected?
CD/DVD Drive Missing in Windows?
- Reinstall Drivers.
- Check BIOS Settings.
- Upper Filters/Lower Filters Problem.
- Run Hardware and Devices Troubleshooter.
- Registry Edit.
- Drive Letter.
- System Restore.
How do I enable my CD drive?
How to enable the DMA settings of a hard disk drive, CD-ROM, CD-R/RW and DVD-ROM drive?
- Start Control Panel.
- Double-click System.
- Click the Device Manager tab.
- For hard disk drive, click to expand Disk Drive. …
- Right-click on the necessary drive and click Properties.
- Click the Settings tab.
- Select the DMA option.
Table of Contents
Why CD drive is not opening?
Try shutting down or configuring any software programs that create discs or monitor the disc drive. If the door still does not open, insert the end of a straightened paper clip into the manual eject hole on the front of the drive. Close all programs and shut down the computer.
When I put a CD in my computer nothing happens Windows 10?
This probably occurs because Windows 10 disables autoplay by default. To initiate installation, insert your CD and then: Select Browse and navigate to the TurboTax CD on your CD/DVD/RW drive (usually your D drive). …
Can’t find DVD CD ROM drives in Device Manager?
Try this – Control Panel – Device Manager – CD/DVD – double click the device – Driver’s Tab -click Update Drivers (this will likely do nothing) – then RIGHT CLICK the drive – UNINSTALL – REBOOT this will refresh the default driver stack. Even if drive is not shown continue below.
How can I read a DVD without a DVD drive?
How to play DVDs on a laptop without a DVD drive
- Use an external DVD drive. Shop HP External Drives Now. …
- Create ISO files for virtual disks. …
- Rip files from CD, DVD, or Blu-ray. …
- Share CD and DVD drives over Windows network.
How do I update my DVD driver?
How to Update Your CD/DVD Driver
- Launch Device Manager. Right-click the Start menu and select Device Manager.
- Right-Click Your Device. Double-click to expand the DVD/CD-ROM section, then right-click your device.
- Update the Driver. Click the Update Driver option.
- Install the New Driver.
How do I install a CD without a CD drive?
Using a Flash Drive
The first step is to copy the files from the installer CD and then pasting it to a flash drive. After copying the necessary data, plug in the flash drive to the laptop with no CD/DVD drive. Click on the installer file and then proceed with the installation process.
When I put a CD in my computer nothing happens?
What’s most likely happened is that the “auto run” feature has been turned off – either on your system or on that specific drive. That means that by definition nothing happens when you insert a disc.
How do I know if my CD drive is working?
How Do I Tell If My CD Drive Is Working?
- Check Operation. Press the button to open the CD-ROM drive. The drive should open to accept a CD. …
- Check the Drive. Click “Start” on the taskbar. Click “Computer” on the right side of the Start menu. …
- Check Device Manager. Click “Start” on the taskbar. Click “Control Panel.”
How do I enable my disabled DVD drive?
To disable/enable the CD/DVD drive in Device Manager: Right click on Computer -> Properties -> Device Manager. Expand DVD/CD-ROM drives, right click on the drive and select Disable. Then do the same for enabling the drive again, the Enable option will be in the same place as Disable was on the menu.
How do I force eject a CD?
Eject the disc within the Operating System
To eject the tray within the Operating System, follow these steps: Press the Windows key + E to open Windows Explorer or File Explorer. Click on Computer or My PC on the left pane of the window. Right-click on the CD/DVD/Blu-ray drive icon and select Eject.
How do you fix a CD tray that won’t open?
Can’t Open the Tray or Eject the Disc From the CD Player
- Power off your CD player.
- Unplug the power cord for 30 seconds, and then plug it back in.
- Power on your device.
- Try to open or close the disc drawer or tray. Note: Make sure nothing blocks the tray from opening or closing.
What to do if CD is not reading in laptop?
If the CD-ROM works in Safe Mode but not in normal Windows, a running program is causing the issue, or the drivers are corrupt. Open Device Manager, highlight and remove the CD-ROM by pressing the delete key. After deleting the CD-ROM, reboot the computer. Windows should then detect the CD-ROM and reinstall it.
How do I start a CD that won’t run automatically?
Press Windows Key + R and enter services.
Now press Enter or click OK. When Services window opens, locate and double-click the Shell Hardware Detection service. Set the Startup type to Automatic. If the service isn’t running, click the Start button to start it.
How do I open a DVD on my computer?
Play a CD or DVD in Windows Media Player
- Insert the disc you want to play into the drive. Typically, the disc will start playing automatically. …
- If you inserted a DVD, select a DVD title or chapter name.
How do I add a DVD drive to my computer?
How to Install a CD/DVD Drive in a PC
- Power down the PC completely. …
- Open the computer to install the CD or DVD drive. …
- Remove the drive slot cover. …
- Set the IDE drive mode. …
- Place the CD/DVD drive into the computer. …
- Attach the internal audio cable. …
- Attach the CD/DVD drive to the computer using an IDE cable.
Where is CD-ROM in Device Manager?
There should be a category name titled “DVD/CD-ROM drives” and if you double-click on it, or if you click on the plus sign next to it, you should see your device name.
Can you use a DVD player as a disk drive?
Answer: Modern computers, especially laptops, rarely come with an optical drive, such as a CD or DVD player. … Most optical drive peripheral devices connect via USB and are plug-and-play. That means you can simply connect the drive and use it the same you would use an internal CD/DVD player.
Why do laptops come without DVD drive?
4 – Omitting the optical drive lets the computer manufacturers build laptops that are smaller, lighter and less expensive than they would have to be if the drive was included. … You can still buy a laptop that does have an internal optical drive. They are getting harder to find every day, but they are still available.
Do laptops have DVD drives anymore?
Modern laptops — and even many modern desktop PCs — are dropping disc drives. … Your options range from purchasing an external drive you can plug in via USB when you need the discs to converting those discs to digital formats so you can access them on demand.
Discussion about this post