How can I recover my undetected hard drive?

How to Recover Data from External Hard Drive Not Recognized

1. Launch Recoverit Data Recovery software on your computer, select the external hard disk to get started.
2. The hard drive recovery will start scanning the disk to searching your lost data and files.
3. After the scanning, you can check all recovered files.

for instance, What do I do if my hard drive is not detected?

How to confirm whether the hard drive is spinning up or not?

1. Boot the computer and try to catch some noise.
2. Power off the system.
3. Disconnect the power cord from the system.
4. Remove the power cable when the hard disk is not detected, or the hard disk you are trying to fix.
5. Reconnect the power cord to the system itself.

significantly, How do I fix Windows 10 not detecting my hard drive?

How to fix “Hard drive not detected” on Windows 10?

1. Re-enable the missing drive in the Disk Management.
2. Reconnect the external hard drive.
3. Format the drive.
4. Check the status of the hard drive.
5. Update the driver.
6. Update Windows.
7. Reinstall USB controllers to make the second hard drive recognized.

also How do I fix Windows not recognizing my external hard drive?

But in some cases, you may connect your drive to a Windows PC or another device with a USB port and find the external hard drive isn’t showing up. This problem has several possible causes: partition issues on the external drive, using the wrong file system, dead USB ports, or driver issues in Windows.

How do I reset my external hard drive?
To reformat a drive on Windows:

1. Plug in the drive and open Windows Explorer.
2. Right-click the drive and choose Format from the drop-down menu.
3. Select the file system you want, give your drive a name under Volume label, and make sure the Quick Format box is checked.
4. Click Start, and the computer will reformat your drive.

How do I reboot my hard drive?

Perform a hard reboot by pushing the computer’s power button and holding it until the computer shuts down. Wait 45 seconds and restart the computer by pushing the power button again. You may have to start up in safe mode, but that also allows you the chance to restart properly or troubleshoot your computer.

How do I fix my external hard drive without formatting?

How to Restore Data from External Hard Drive Without Formatting?

1. Scan Your Computer for Viruses.
2. Use CHKDSK to Fix File System Errors.
3. Replace Corrupted Files with SFC.
4. Recover Your Files with Data Recovery Software.

How do I reset my hard drive without a computer?

There isn’t any practicable way to wipe it without connecting it to a PC. That’s OK, though – just connect it to your new PC and when you boot from the Windows DVD to install Windows you can use the installation program to delete / recreate the partitions on it and format it.

What happens when you reboot a hard drive?

Resetting, or formatting, the hard drive removes all of the data on the drive; back up your important files before proceeding.

How do I manually reboot my computer?

How to Reboot a Computer Manually

1. Press and hold the power button. Hold the power button down for 5 seconds or until the computer’s power is off. …
2. Wait 30 seconds. …
3. Press the power button to start the computer. …
4. Properly restart.

How I can reboot my computer?

Hard Reboot

1. Press and hold the power button on the front of the computer for approximately 5 seconds. The computer will shut off. No lights should be near the power button. If lights are still on, you can unplug the power cord to the computer tower.
2. Wait 30 seconds.
3. Push the power button to turn the computer on again.

How do I fix a corrupted Seagate external hard drive?

How to fix a corrupted external hard drive WITHOUT formatting

1. On the desktop, open This PC (My Computer) and select the desired external hard drive. Right-click it and select Properties -> Tools -> Click on Check. …
2. Use chkdsk.
3. Use Disk Management. …
4. Use diskpart.

How do I recover an unreadable external hard drive?

Connect the external hard drive to your system and download Remo Recover install it and follow the below explained steps to perform unreadable hard drive recovery:

1. Once you have installed Remo Recover (Windows/Mac), run the software.
2. Select “Recover Partitions” from the options displayed.

Will formatting fix a corrupted hard drive?

To repair a corrupt hard disk, you can format it, which is the simplest way to repair a corrupt drive. But, it causes permanent data loss. However, you can recover your lost data with the help of Stellar Data Recovery software.

How do I access my hard drive without a computer?

Let’s look at each of them in turn.

1. 
   Connect
   
   via Special USB Cable Adapter. Vantec SATA/IDE to USB 3.0 Adapter (CB-ISA225-U3) BUY NOW ON AMAZON. …
2. Hack an
   
   External HDD
   
   . …
3. Mount the
   
   HDD
   
   Into an
   
   External
   
   Enclosure. …
4. Browse for Data Using a USB Docking Station. …
5. Install the
   
   HDD
   
   to Your
   
   PC
   
   .

How do I permanently erase my hard drive?

Whenever you want to securely erase your data, follow these steps.

1. Navigate to the files or folders that you want to securely erase.
2. Right-click on the files and/or folders and an Eraser menu will appear.
3. Highlight and click Erase in the Eraser menu.
4. Click Start > Run… , type cmd and press OK or Enter (Return).

Can I restart computer with hard drive connected?

2 Answers. You CAN keep your hard drive or other storage devices connected while your PC shuts down. No risk of data loss. But if you initiate shutdown process in your OS, wait for it to completely shutdown and turn off and then remove your hard disk.

What happens to the information on the hard drive when your computer is turned off?

During the shutdown process, Windows will close down any files it was reading or writing. It will then close down the system registry, the most important set of files for the operating system. The hard disk arm, which reads files across the hard disk, is being parked at one side of the disk.

Does force shutdown damage HDD?

While your hardware won’t take any damage from a forced shutdown, your data might. If you are working on any files when things go bad, then at a minimum you will lose your unsaved work. Beyond that, it is also possible that the shutdown will cause data corruption in any files that you have open.

What buttons do I push to reboot my computer?

Use Ctrl + Alt + Delete

1. On your computer keyboard, hold down the control (Ctrl), alternate (Alt), and delete (Del) keys at the same time.
2. Release the keys and wait for a new menu or window to appear.
3. In the bottom right corner of the screen, click the Power icon. …
4. Select between Shut Down and Restart.

What causes a computer not to boot up?

Common boot up issues are caused by the following: software that was installed incorrectly, driver corruption, an update that failed, abrupt power outage and the system did not shut down properly. Let’s not forget registry corruption or virus’ / malware infections that can completely mess up a computer’s boot sequence.

Why won’t my computer turn on but has power?

Make sure any surge protector or power strip is correctly plugged into the outlet, and that the power switch is on. … Double-check that your PC’s power supply on/off switch is on. Confirm that the PC power cable is properly plugged into the power supply and outlet, as it can become loose over time.

What key do I press to reboot my computer?

Use Ctrl + Alt + Delete

1. On your computer keyboard, hold down the control (Ctrl), alternate (Alt), and delete (Del) keys at the same time.
2. Release the keys and wait for a new menu or window to appear.
3. In the bottom right corner of the screen, click the Power icon. …
4. Select between Shut Down and Restart.

How do you fix a computer that won’t start up?

How to troubleshoot your Windows PC when it won’t turn on

1. Try a different power source.
2. Try a different power cable.
3. Let the battery charge.
4. Decrypt the beep codes.
5. Check your display.
6. Check your BIOS or UEFI settings.
7. Try Safe Mode.
8. Disconnect everything non-essential.

• Reference 1
• Reference 2
• Reference 3
• Reference 4