Yes it works, you won’t be running in dual channel but from my perspective it doesn’t affect much in the day to day performance. I won’t suggest you to get 2x4GB because you won’t be able to upgrade later. Just get one 8GB DDR4 and later you could get another 8 or 16 stick.
particularly, Why is single channel ram bad?
According to that, running in single channel memory impacts minimum FPS more than the average FPS. So you’ll probably see more hiccups.
thus, Is it OK to have 3 RAM sticks?
To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.
in effect Is it better to have 1 or 2 sticks of RAM?
Typically, single sticks of RAM are less expensive than dual kits. … If you can only afford 8GB of RAM right now and a motherboard with only two DIMM slots, it might make more sense to go with a single 8GB stick of RAM rather than dual 4GB sticks of RAM.
Should I use all 4 RAM slots?
A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.
Table of Contents
Is single slot RAM better than dual?
In our Euler 3D Benchmarking, the Dual Channel Memory configuration performed approximately 17% better than the Single Channel Memory configuration. The difference between the two puts the Dual Channel Memory ahead of its competitor.
Is single RAM good?
Typically, single sticks of RAM are less expensive than dual kits. … If you can only afford 8GB of RAM right now and a motherboard with only two DIMM slots, it might make more sense to go with a single 8GB stick of RAM rather than dual 4GB sticks of RAM.
Can you use 3 out of 4 RAM slots?
Using 3 DIMM slots ‘can’ be done but you break the Dual Channel mode. However, mix-matching RAM is a ‘bad’ no ‘really bad idea. ‘ Simply move the fan up higher, the airflow difference won’t make a noticeable difference.
Can I use 1333MHz and 1600MHz RAM together?
You can, both sticks will run at 1333MHz. As long as your motherboard supports more than 8gb of RAM, which most of them do.
Is 16GB RAM enough?
16GB of RAM is the best place to start for a gaming PC. … Few games, even the latest ones, will actually take advantage of a full 16GB of RAM. Instead, the extra capacity gives you some wiggle room in running other applications while your games are running. For the vast majority of gamers, 16GB is enough.
How many sticks of RAM can you have on the motherboard?
Look for the maximum amount of RAM or System Memory that can be installed. You will also see the number of available slots on your motherboard. RAM needs to be installed in pairs. If your motherboard supports 16 GB of RAM and has four slots, you can install four 4 GB sticks or two 8 GB sticks to reach your maximum.
Can I add 8GB RAM to 4GB?
If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)
Should I get 2 8GB or 1 16GB?
Always go with a matching pair. 2 8GB sticks will yield roughly 25% more performance over a comparable 16GB stick. Dual channel is always going to be better than single. You will absolutely notice the difference in pretty much all applications that use more than 2GB of memory, which these days is pretty much anything.
Is it better to have 4 RAM or 2?
On dual channel motherboard 2 ram modules give the best performance. Going to 4 modules requires Command Rate increase from 1T to 2T and that causes slight performance hit. Not that it would be very noticeable, but it’s there.
Can I add 8GB RAM to 4GB laptop?
If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)
Is it better to use 2 RAM slots or 4?
The only difference will be if you populate all 4 slots. With 2 RAM slots you are only able to install 32GB RAM but able to use the faster RAM. With 4 slots you can have 64GB RAM, but the Ryzen will only support RAM at DDR4-2133MHz in that configuration (might be 2400 on the Ryzen 2’s).
Can I put DDR4 RAM in any slot?
The short answer is that yes, there are plenty of differences, but most of the time your motherboard will make the decision for you. A motherboard with DDR4 slots cannot use DDR3, and you can’t put DDR4 into a DDR3 slot.
Is it better to have more sticks of RAM?
It is of course much better for performance to populate all memory channels. That is, it is better to use many smaller size RAM sticks to populate all channels than just a single or two large size sticks inserted into 1 or 2 memory channels.
Can you use two different brands of RAM?
Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes. However, if you are going to buy a new RAM stick, it would benefit you to just buy something that is compatible. … So at the end of the day, yes you can mix RAM brands as long as you are careful.
Is 1×8 or 2×4 RAM better?
Additionally, with 2×4, if one stick of RAM dies, you’ll have a stick left to keep your PC running. With
1×8, there is not backup
. 1×8 is better for expandability.
…
Would you recommend [1×8] or [2×4] Memory RAM and why?
| 1×8 | 2×4 |
|---|---|
| PC unbootable if one stick breaks | PC bootable if one stick breaks |
| Cheaper | More expensive |
•
May 17, 2015
Is it OK to use all 4 RAM slots?
A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.
Is it better to have two or four sticks of RAM?
So, you get the most performance when you use at least one stick on each memory channel, so two memory sticks. If you install four memory sticks, you won’t get better performance, it’s still just two memory channels transferring data to the processor cores.
Is it OK to use different MHz RAM together?
You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.
Is 1600mhz RAM slow?
For most games, 1600mhz RAM is a good enough speed. You won’t run into many issues, as long as the other pieces of your build can live up to the speed. … One thing to note is that most DDR3 1600mhz RAM devices are significantly impacted by other devices in your computer.
Why does my 1600mhz RAM shows 1333mHz?
You do have to enable XMP profile in BIOS to get 1600 MHz. 1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it.
Discussion about this post