If your PS3 is giving you an error message with the number 8001002B, then your system is indicating to you that there is an issue with the internal I/O hardware of the system. … The more the system is tampered with, the less likely it becomes for a successful repair.
Then, What is error code 8001002B On PS3?
Ps3 error 8001002B with headset pairing
The code means “dirty or damaged disc”. The PS3 has encountered some kind of problem reading the disc. Possibly the laser could be having problems, possibly the disc. Try another game disc. If it works, the game disc you are trying to start is somehow damaged.
in addition How do you clean a ps3 disc?
Dampen a clean, soft, cotton cloth with water. Use straight strokes and wipe the disc (non-labeled side) from the inside rim to the outside rim. Using a dry part of the cloth, repeat step 2 to dry the disc.
furthermore How do you fix a PlayStation 3 disc?
PS3 Doesn’t Read Optical Media
- Insert a disk into the PlayStation 3 Blu-ray Drive.
- Clean the Disk – Using a cleaning solution and a microfiber cloth, clean the disc.
- Eject the disk.
- Re-insert the disk into the PlayStation 3.
- Clean the Lens.
- Eject the disk.
- Re-insert the disk into the PlayStation 3.
What causes a PS3 to not read discs?
It may seem obvious, but one of the most common reasons for a console’s inability to read a disc is disc damage. Check both sides of your disc to make sure that it is not scratched or damaged, and then clean your disc carefully using a microfibre cloth.
Table of Contents
How do I restore my PS3 system?
On PS3, restore file system and rebuild database: Turn off PS3. Hold the power button until it turns off again. Turn it on by holding the power button and wait for two quick beeps. Release the button and you will be in the recovery menu.
Can you swap PS3 disc drives?
1 Answer. If the two disc drives are the same model and the one you are replacing with works, then yes you can perform a swap of the drive.
How do I fix my PlayStation disc reader?
Restarting the PS4 system is likely to solve the disc read/eject problem.
- Press the power button until you hear two beeps indicating it is completely off.
- Take off the power cable for a few seconds and plug it back in.
- Turn on the power button and try using a disc on the system.
What happens if you restore PS3 system?
When you perform this operation, all data in the system storage will be deleted. Also, the system software will be restored to its default settings. Be careful not to accidentally delete important data as the changes cannot be undone. Data loss or corruption is the responsibility of the user.
How long does it take for a PlayStation 3 to restore?
How long does this take? Only 2 – 5 minutes. It’s a good thing to do if you’re having any issues with your PS3.
Are PS3 slim blu-ray?
Yes, the Blu-Ray format was created by Sony and released with the PS3, there is no way they would get rid of it for the PS3 super slim.
Are PS3 disc drives married?
Blu-ray drives are not completely interchangeable on the Sony PlayStation 3 console. Each Blu-ray drive daughterboard is only compatible with specific motherboards, which is referred to as marriage.
How do you fix a disc that won’t read?
Here are a few methods to try to fix your scratched disc at home:
- Rubbing Alcohol Method: Get a lint free non scratching cloth. …
- Toothpaste Method: Use a small dab of the gritty type of toothpaste. …
- Banana Method: Use a banana that is peeled and cut in half. …
- Skip Scratch Fixer Method: …
- Petroleum Jelly Method:
What to do if PS4 won’t read disc?
PS4 disc troubleshooting
- Clean the disc with a soft clean cloth to remove any dirt or prints.
- Try inserting another game, Blu-Ray disc, or DVD. The PS4™ console does not play burned discs or audio CDs.
Why won’t my Playstation take my disc?
If there is too much dust accumulated in the drive, or the rollers are dirty, it may refuse to take in new discs or read any disc that is currently in the system. Inspect your PS4 disc drive for damage. Remove the top cover of your PS4, and physically inspect the disc drive.
How do I restore my PS3 before selling?
After you deactivate your account, and then delete it, you can factory reset the console from Settings >>System Settings >> Format Hard Disk. That will erase all your saves and system preferences off the the PS3 (networking, time zone, your all-important printer settings, etc.).
Do I need to wipe PS3 before selling?
Reformatting the hard drive will erase everything on it except system software which you need. You don’t need any special hardware for this- just the console, the hard drive and time. The format utility is found in settings-> system settings.
Why does it take so long to factory reset a PS3?
Some common reasons why you might need to format: You purchased a hard-drive that the PS3 does not understand. You installed and removed many games many times and the hard-drive has become to fragmented and when playing games on your system run way slower then when the PS3 was new.
What happens if I restore my PS3 to default settings?
When you perform this operation, the system software and the information for the user who is currently logged in will be restored to the default settings. … If the operation is cancelled before completion, the system software may become damaged, and the system may require servicing or exchange.
How do I fix a corrupted PS3 without losing data?
Navigate to “Settings,” select “System Settings,” then advance to the “Format Utility” screen. Press the “X” button on the “Format Hard Disk” option. Select “Yes” when the warning screen indicates, “If you format, all data on the hard disk will be deleted. This data cannot be restored.
Is PS3 still a good Blu-ray player?
The PS3 made all the difference in putting Blu-ray ahead for good. … The PS3 was always among the best Blu-ray players, as well. It was fast to start playing discs. And through system firmware updates, Sony added new features and playback capabilities at a much faster cadence than companies with standalone players.
Can you use an external Blu-ray drive with PS3?
The Sony PlayStation 3 (PS3) is a computer game console capable of playing high definition video games, Blue Ray discs, standard DVDs, MP3 files and audio CDs. … It is possible to connect an external DVD drive to the PS3 via the USB connection and then access the drive from your PS3 menu.
Can PS3 play 3D Blu-ray?
The PlayStation 3’s received a firmware update that lets it play 3D Blu-ray discs. … Now the free 3.50 firmware update is available, bequeathing the ability to play actual 3D Blu-ray movie discs.
Can PS3 run without Blu-Ray drive?
re: PS3 work without Blu-Ray drive? With no blu-ray drive then you can’t play any disc based PS3 games as they are on blu-ray discs. If the BD is broken then the PS3 can’t read data on the BD discs therefore games can’t run.
Can PS3 Blu-ray drive work on PC?
The PlayStation 3 has a Blu-ray disc drive inside of it that reads Blu-ray discs. You can take the PS3 Blu-ray disk drive and insert it into a drive bay inside of a Mac desktop or PC desktop or Tower because it is the same size as the DVD drives that the computers use.
Discussion about this post