LEXAN: Pros & Cons
Polycarbonate is less rigid than acrylic plexiglass, meaning it does not crack when drilled, and can be bent without heating (cold bending). … The cons of LEXAN are that it is easier to scratch, and minor scratches cannot be polished away.
for instance, How much is a sheet of Lexan?
Clear LEXAN 9034 Polycarbonate Sheet
Stock | Description | Price |
---|---|---|
43041 |
0.375″ (9.5mm) x 12″ x 12″ Clear LEXAN ™ 9034 Polycarbonate Sheet $21.99/Sheet In Stock | $21.99/Sheet In Stock |
43042 |
0.472″ (12.7mm) x 12″ x 12″ Clear LEXAN ™ 9034 Polycarbonate Sheet $29.35/Sheet In Stock | $29.35/Sheet In Stock |
significantly, Does Lexan yellow over time?
Cons of Lexan:
Poorer clarity, cannot be polished to restore clarity. Can be yellowed over time by UV rays. Low level of resistance to abrasive cleaners and surfaces.
also What can I clean Lexan with?
Wash Lexan™ Sheet with a mild soap or detergent (e.g., Joy** dishwashing liquid) and lukewarm water using a clean sponge or a soft cloth. Rinse well with clean water. Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots.
How much weight do Lexan windows save? The windshield is 1/2 the weight if using 3/16″ Lexan. I think changing my huge windshield only saved 20 pounds. Side windows should see a greater loss if you remove the regulator and much of the support metal. Rear window can be thinner Lexan than the windshield but may need some supports.
Table of Contents
Which is better plexiglass or Lexan?
Lexan has the higher impact resistance of the two and will (in most cases) bend rather than crack. … Besides being less inclined to discoloration, Plexiglass is more scratch-resistant and tends to be the less costly, but is does not have the same strength as Lexan.
Can you drill holes in Lexan?
It takes a special drill bit to properly drill through Plexiglas, Lucite, Acrylite, or Perspex acrylic sheet. Ideal for Lexan, Tuffak or Makrolon polycarbonate sheet. … When drilling holes for screws, you must make the hole larger than the screw itself to allow for expansion and contraction of the material.
How thick can you get Lexan?
In addition to colorless (clear), Lexan 9034 is available in solar gray and bronze in thicknesses from . 080″ to 1/2″. Lexan 9034 uncoated polycarbonate sheet is the standard grade of Lexan sheet for general purpose applications.
Can you use Windex on Lexan?
Please… never, ever, use cleaners containing ammonia. Cleaners such as Windex or 409 will harm your new piece of polycarbonate. Use only products specifically recommended for cleaning polycarbonate such as Novus #1, or Brillianize, and a soft cloth.
What is cheaper Lexan or Plexiglass?
When it comes to cost, Plexiglass is usually cheaper than other materials, including Lexan. One of the reasons is because it is lighter in weight.
How long will Lexan last?
While Lexan might last for 15 years, safety glass has a longer lifespan. Even though Lexan serves as a great defence against UV radiation, over time it turns yellow.
Can I use Windex on Lexan?
Cleaners such as Windex or 409 will harm your new piece of polycarbonate. Use only products specifically recommended for cleaning polycarbonate such as Novus #1, or Brillianize, and a soft cloth. (All are available in our showrooms and OnLine). Never use a dry cloth or your hand to clean your polycarbonate!
How do you protect Lexan?
The best way to protect Lexan is take it out, wrap it in a fluffy blanket, and put in an OEM windshield.
Can you use alcohol on Lexan?
Do not use alcohols or butyl cellosolve on the UV-protected surfaces of Lexan sheet. Never clean the Dripgard surface of Lexan multiwall and corrugated sheets. … Afterwards, wash the sheet using mild soap and lukewarm water, then rinse with clean water to remove residue and dry with a soft cloth.
Is a Lexan windshield street legal?
Wipers will scratch the Lexan but if you start with the mar resistant stuff and dont let your wiper blades get dried out you can minimize the scratching. It is not going to be legal for street use but with the higher quality Lexans (GE brand) and proper care it can be effective as a windsheild.
What is a Lexan window?
Lexan is not an actual glass but is a name for a polycarbonate thermoplastic. This makes it far more durable than glass and is commonly used in place of it. Safety glass is called so because upon impact it either bulges or breaks into blunt granules that are harmless.
How much does a Lexan windshield weigh?
A Daytona rear glass window is ~25lbs a piece of Lexan that size ~10lbs.
Does Lexan turn yellow?
It depends on climate and whether the Lexan was treated or coated for UV exposure. There are greenhouses that go far more than 10 years and they aren’t yellow. For untreated Lexan the yellow is on the surface and can be polished off.
Can Lexan be bent?
Lexan Sheet can be cold bent and can bend to tighter curves than polymethyl methacrylate, Acrylic. Bending Lexan sheet is easy because of its excellent flexibility factor. It can easily be formed, and formed, and reformed. … Polycarbonate is more than 200 times stronger than glass.
At what temperature does Lexan become pliable?
Usually, at between 155oC and 165oC, the heated region becomes pliable enough to be bent to the desired angle.
Is Lexan easy to drill?
yeah lexan doesnt crack, I never had any problems drilling into it. If its cracking you are probably using plexiglass or something similiar.
Can you cut Lexan with a Dremel?
You can use a table saw, circular hand saw, jig saw, or band saw to cut Lexan. This Processing Guide (PDF) has details on the sorts of blades you should use. It does say that you can mill Lexan with at bit more like the Dremel Router bits they recommend 25,000 – 30,000 RPM.
How strong is Lexan?
Lexan is an extremely strong material that is almost unbreakable. Safety glass is not as strong. Tempered safety glass has an impact strength that’s five times higher than “normal” annealed glass of the same thickness, while Lexan has an impact strength that’s 250 times that of annealed glass.
Can you bend Lexan?
Lexan Sheet can be cold bent and can bend to tighter curves than polymethyl methacrylate, Acrylic. Bending Lexan sheet is easy because of its excellent flexibility factor. It can easily be formed, and formed, and reformed. … Polycarbonate is more than 200 times stronger than glass.
Discussion about this post